Water & Sewer Rates

Residential
Flat rate, first 2,000 gallons: $22.00
Rate per additional 1,000 gallons: $5.75

Commercial
Flat rate, first 2,000 gallons: $30.00
Rate per additional 1,000 gallons: $5.75
Bulk rate: $3.00/ 1,000
Bulk rate – Capacity holders: $2.35/ 1,000

Bulk rate-Woodlake: $3.20/1,000

Hydrant rate: $7.00/ 1,000
Hydrant Rental (3/4″): $5/day, $140/month, $1200/yr upfront
Hydrant Rental (3″): $10/day, $280/month, $2500/yr upfront
Energy charge: $0.35/ 1,000 (depends on how many lifts)

Residential
Flat rate, no gallons: $16.00
Rate per 1,000 gallons: $6.50
Flat rate, One person household: $42.00
Flat rate, Two+ person household: $48.00

Commercial
Flat rate, no gallons: $45.00
Rate per 1,000 gallons: $6.50

Institutional
Flat rate, no gallons: $300.00 minimum
Rate per 1,000 gallons: $6.50
Bulk rate – Capacity holders: $2.75/ 1,000

Bulk rate – Linden Oaks: $3.00/1,000
Septage haulers – Basic facilities charge: $20.00/ truckload
Septage haulers – Usage charge: $65.00/ 1,000

Customers with approved credit can expect to pay the 1st amount listed below. The 2nd amount is the deposit for credit risk customers.

Water deposit for owners: $25/$50
Sewer deposit for owners: $25/$50

Water deposit for renters: $50/$100
Sewer deposit for renters: $50/$100

Hydrant rental deposit, 3/4″ meter: $250 (refundable)
Hydrant rental deposit, 3″ meter: $500 (refundable)

Setup fees: $15
Transfer fee: $15
Reconnect fee: $40

After hours call out: $50
Water samples: $30 and up
Damage fees as advised: $100 and up

Water
Water Tap On Fee, 3/4″ Residential Service + System Development Fee: $1,200 (Total $4,200)
Water Tap On Fee, 1″ Residential Service +System Development Fee: $2,200 (Total $5,200)
Water Tap On Fee, 2″ Residential Service +System Development Fee: $3,500 (Total $6,500)

Water System Development Fee – All Districts, Residential: $3,000
Water Tap On Fee, Commercial: Based on system development fee/residential equivalent. Refer to Engineering.

3/4″ AMI meter & mxu: $425

1″ AMI meter & mxu: $550

2″ AMI meter & mxu: $2050

Sprinkler Tap Based on meter size: 3/4″ $500 + $425 meter & mxu fee=$925, 1″ $650 + $550 meter & mxu fee=$1,200, 2″ $2,000+$2,050 meter & mxu fee=$4,050

Sewer
Sewer Tap On Fee, Residential, All Districts, tap cost may vary due to main depth & bore length: $1,500
Sewer  System Development Fee – All Districts, Residential $4,000
Sewer Tap – Step Tank, Bunnlevel-Riverside, tap cost may vary due to length of connection to main: $2,800
Sewer Tap On Fee, Commercial: Based on system development fee/ residential equivalent. Refer to Engineering.
Sewer Tap Fees: All residential, $5,500. Riverside/Bunnlevel: $6,800. Commercial refer to Engineering.